Repair Kit Edison the Petit

REPLACE BATTERY

1. Turn the lamp upside down.
2. Unscrew the screws.
3. Lift the inner part out of the lamp.
4. Unscrew the battery holder.
5. Remove and disconnect the battery.
6. Insert and connect the new battery.
7. Reattach the battery holder with the screws.
8. Put the inner part back inside the lamp.
9. Fasten the screws to close the lamp.
10. You can now use the lamp again.

REPLACE MOTHERBOARD

1. Turn the lamp upside down.
2. Unscrew the screws.
3. Lift the inner part out of the lamp.
4. Unscrew the optics.
5. Unscrew the old motherboard.
6. Disconnect the old motherboard.
7. Attach the new motherboard with the screws.
8. Reattach the optics with the screws.
9. Connect the new motherboard.
10. Put the inner part back inside the lamp.
11. Fasten the screws to close the lamp.
12. You can now use the lamp again.

REPLACE OPTIC

1. Turn the lamp upside down.
2. Unscrew the screws.
3. Lift the inner part out of the lamp.
4. Unscrew and remove the old optics.
5. Slide the thin tube into the new optics.
6. Insert new optics and attach tightly with the screws.
7. Put the inner part back inside the lamp.
8. Fasten the screws to close the lamp.
9. You can now use the lamp again.

REPLACE SWITCH

1. Turn the lamp upside down.
2. Unscrew the screws.
3. Lift the inner part out of the lamp.
4. Pull off the lampshade.
5. Detach the red Fatboy label.
6. Remove the old switch/lever.
7. Snap in the new switch/lever.
8. Attach the red Fatboy label.
9. Replace the lampshade.
10. Put the inner part back inside the lamp and align with the switch/lever.
11. Fasten the screws to close the lamp.
12.You can now use the lamp again.

REPLACE LABEL